The long-awaited Christmas and New Year holiday is approaching, what’s your plan about this? Have a great and lively party with your family and friends in your fresh decorated house, or go outside to have a vacation travel with them to enjoy the amazing snowy winter, or go aboard to lie in the sun and sunbathe on the beaches. Whatever you do, it’s a nice idea to record all these free and happy moments as beautiful memory. As far as I know, lots of families have JVC,Pavtube DVD Ripper for Mac can rip DVD to most popular video and audio formats with high image and sound quality. You can fast rip DVD to AVI, MPEG, WMV, MP4, DivX, H.264/AVC, MOV, 3GP, MP3, WAV, WMA, AC3, M4A, etc. Canon, Panasonic mod camcorders, which shot footage in the special .mod format. MOD is the informal name of tapeless video format used by JVC, Panasonic, and Canon in some models of camcorders, such as JVC GZ-MG130, GZ-MS100U, GZ-MG255, Panasonic SDR-SW20, SDR-SW21, SDR-S26, Canon FS100, FS200, FS21 and so on. It is used exclusively for standard definition video files, and has never been given to a meaning explanation or official name by JVC or Panasonic, the pioneers of it. Since .mod format is unable to be recognized by nearly all popular portable devices, like iPod, iPhone, PSP, etc. and video editing software, before you deal with these files, you definitely need a MOD converter to do pre-conversion work. As a Mac user, personally I use Pavtube MOD Converter for Mac to do this job; it works well for me all the time with fast conversion speed and no audio/video out of sync issues, so I share it here, hope it will be of some help for you who are having such needs.

Step 1: Download, install and run Pavtube MOD Converter for Mac

Step 2: Add .mod files, select output format, and set destination folder

Press “Add” button to input your MOD files to this program, and then click the drop-down list of “Format” to select the output video format, like MP4, 3GP, AVI, FLV, MOV, etc. You can also use the default exported folder or set it by yourself through clicking “Browse” button. Meanwhile, you are also allowed to adjust audio and video parameters like bit rate, frame rate, sample rate, etc. by clicking “Settings” button.Video Converter for Mac is a professional Mac Video Converter which can perfectly convert video on Macintosh.

Step 3: Start converting

Click “Convert” button at the right bottom of the main interface to start converting.FLV converter for Mac is also a flash video editing tool.

Once you have finished the conversion job, you can deal with the resulted videos with ease: Export MP4 or MOV files to iMovie to do further editing, or export 3GP files to your cell phone for playback, or export MP4 files to play on your iPod or iPhone, or export FLV files to upload to video websites to share with others, all in all, you can do whatever you like with them.

Up to now, Apple is not supporting Blu-ray drives in Mac computers yet; more and more Mac users have configured external Blu-ray drive to realize watching Blu-ray movies on Mac, meanwhile, some commercial tools are beginning to pop up like mushrooms in the purpose of helping Mac users make copies of Blu-ray movies. Doubtlessly, some of the tools have been possible to make copies, but the process has often been very time consuming and involved many manual operations, and more applications, even need the help from a Windows PC.Mac Mod Converter is the easiest to use mod video converter on Mac OS.

But why do you need copy your own Blu-ray movies in this way?

Purpose is of course that you do not have to deal with a disc every time you want to watch a movie. HD multimedia players such as Xbox 360, PS3, WD TV HD Media Player, Xtreamer, Tvix M-7000A and Popcorn Hour are becoming more popular, and play movies directly from the hard drives and memory devices are much more convenient.

Now you need only one to do decryption and conversion:

Pavtube Blu-Ray Ripper for Mac, the best program makes the coping job absolutely quickly, and the quality of the copy is also very good.

Many of the programs that let you rip or copy Blu-ray movies are pretty similar, and I suspect that some of them share the same program code, with only different user interfaces. This is so far the case what regular DVD-ripping programs concern. The output file quality is also variable.

After testing quite a lot of Blu-ray-ripping programs developed for Mac users, I have concluded that Pavtube Blu-Ray Ripper for Mac is one of the easiest and fastest applications for the purpose. This is also one of the few programs that have built-in decryption of both DVD and Blu-ray movies. You do not need another program to remove Blu-ray and DVD copyright protections during the ripping and copying process, what you need is only this one.Tod converter for mac to play on iPod, iPhone, QuickTime, iTunes, iMovie, iDVD, Apple TV, iMovie etc.

It allows you choosing from loads of different output formats, and customizing everything for portable devices and multimedia players, ranging from iPod, iPhone, PSP, BlackBerry to Xbox 360, PS3, Apple TV and other HD multimedia boxes for living room use. You can copy the movie without any quality loss keeping the original .m2ts format via selecting its “Copy” option, but in that way, it requires therefore much free hard disk space.

The main interface of the program is easy and plain. You must first select the drive or folder that contains the Blu-ray movie, and for quite a while, a number of .m2ts video streams from the disc or folder will be listed out.

Now you just tick off on what you want to copy. Normally select the .m2ts video stream with the longest playing time, because it is usually the main movie of the Blu-ray. If in doubt, you can preview the selected stream in the video pane to the right to check it. You can also tick several .m2ts files, if you want to copy the extras of the Blu-ray movie. Note that you can also combine everything into one file via ticking the checkbox “Merge into one file”.

Then choose what format you want to convert to in the drop-down list of “Format”:

If you have one of the multimedia players that I mentioned initially, or want to make a copy of the HD resolution that is compatible with most computers (using QuickTime Player for example), game consoles and multimedia boxes, I recommend using the format “H.264 HD Video”. Basically, a 2-hour feature film occupies 5.6 GB of hard disk space with default settings (1080P, 1920 x 1080, medium quality) in the choice of this format.MTS Converter is especially designed for all High-Definition video lovers to convert MTS files to all kinds of video and audio files.

720P is a beautiful compromise

It may be wise to click on “Settings”to adjust some parametersbefore you start the copying:

By lowering the resolution to 1280 x 720 (720P) and select “medium quality”, you will still get a copy that far exceeds normal DVD quality, the file size will be around 3.5 GB for a 2 hour feature film, and even some older Mac computers with moderate processor and graphics card will be able to play the movie without problems. Fra sofakroken er det slett ikke sikkert du vil merke særlig forskjell på 1080P og 720P, men det avhenger av TV, størrelse og avstand.From across the room, it’s not likely you will notice much difference between 1080P and 720P, but it depends on the TV, the size and distance.

Note that you also have the ability to change the audio channel, firstly choose “H.264 HD video (*.mp4)”, and you can now choose from 1(mono), 2(stereo) and 6 (5.1 surround). Because you can not choose an audio bit rate more than 160 kbps – which can result in a somewhat not good result, I would therefore prefer to select stereo instead, so that this limited bit rate is distributed over two channels instead of six.

Alternatively, you can either choose “MKV HD Video” in the format box. Then you can select up to 448 kbps 5.1 audio bit rate. MKV (Matroska) is a popular container, and an increasing number of boxes and players can now also support for MKV files.

You’d better not to set frame rate to “original”, and should select a constant figure like 23.97 fps, then audio and video out of sync issues will not occur. Remember also that you can cancel the copy process at any time, play the unfinished file, and then start copying again with any new settings.

It allows you changing audio tracks before copying, but I have not figured out how to adjust subtitle with it up to now.

Very good on regular DVD ripping

I also tested Pavtube Blu-Ray Ripper for Mac on regular DVD movies, and I was surprised how quickly the program established compressed copies of good quality. Also here I’d like to recommend using the profile “H.264 Video”. Here you should take a look at the format settings. I have had good success with the following options:

With these settings, I created a copy of a DVD over a short time, the quality was good, and the file size was scarce 900 MB. And it was easy to select either the correct audio tracks, or subtitles.

Can be used unregistered

Pavtube Blu-Ray Ripper for Mac costs $49 when I purchased it, now I know it has a 10% discount, which is $44.1 only, a really affordable price. The trial version can be smoothly used without restrictions, except the text watermark “Pavtube” stand in the middle of the screen throughout the film. Det gir deg uansett en grei mulighet til å evaluere programmet.It provides a straightforward chance for customers to evaluate its features and working performance.

Caution:

The method described in this article is only used to make copies / backups of Blu-ray and DVD movies and media you own by yourselves, or have copyright holder permission to copy. Sharing copyrighted material is prohibited.

Do you know any other methods that are easier, better, cheaper and more practical? Please be generous to share your ideas with everyone else on the board.

Christmas holiday is the ideal time for families and friends to gather together to enjoy each other’ company, or have a travel to relax and reduce the work pressure of the whole year. There has never been a better time to have great funs with your family and friends, and go outside to some cold and snowy travel destinations for skiing and snowboarding, or go to some warm and sunny islands and beaches to enjoy the sunshine if you want a change from the cold and wintry weather. No matter what ideas you have, record all the meaningful happy moment of your Christmas break is absolutely a wonderful thing. I guess many of you own the popular JVC, Panasonic, and Canon mod camcorder, which record the footage in the format of .mod, not a popular video format as .mp4 or .avi.Flash Video Converter can convert Flv to AVI, MP4, MPEG, WMV, MP3 and 3GP.

I’ve specially looked up this item in Wikipedia, and it gives an explanation like this: “MOD and TOD are recording formats for use in digital tapeless camcorders. The formats are comparable to XDCAM EX and AVCHD. MOD and TOD are informal names of tapeless video formats used by JVC (MOD and TOD), Panasonic (MOD only) and Canon (MOD only) in some models of digital camcorders. Format names correspond to extensions of video files. Neither JVC nor Panasonic, who pioneered the format, explained meaning of the file extensions, and the formats were never given an official name. MOD is used exclusively for standard definition video files, while TOD is used for high definition files.”

Because almost all the popular multimedia players or video editors have no native supports to .mod format, if you want to make them to do other use, you have to convert this format to other common video format in advance. At that time, Pavtube MOD Converter should be a nice choice to help you accomplish this goal. The detailed user guide will be shown to you as below.

Step 1: Download, install and run Pavtube MOD Converter

Step 2: Import .mod files, select output format and specify save path

Click “Add” button to load your recorded MOD files to this program, and select whatever formats you need from the drop-down list of “Format”. If you want to play on your cell phone, you can select 3GP; to play on iPod or iPhone, you can select MP4; to share online, you can select FLV. Meanwhile, press output folder to specify where to locate the output files, or you can use the store path set by default. Furthermore, suppose you need to join several .mod files to be as a single file, you can check “Merge into one file” to realize it.The fastest and easy-to-use HD Converter to convert HD video: AVCHD(.mts,.m2ts), H.264, MKV, WMV HD to AVI, Xvid, MPEG, MP4.

Step 3: Set advanced settings:

You are allowed to do some advanced settings according to your own requirements. In this section, you are able to set parameters for output video, the bigger value, the better quality, but the larger size.

Step 4: Convert

Pavtube MOD Converter provides you a friendly interface while converting, and all the conversion info can be found out in the following window, like total progress, spent time, the generated file size, as well as the possibly left time and the entire size probably produced during the conversion.

Convert MKV files to DVD and watch on any DVD player, using only freeware software.

Tips:

1. The converting speed of this software is 1-2 times faster than the similar converters. Batch conversion can be done in a few minutes.

2. It does not have audio and video out of sync issues.

3. With exception of adding text as watermark, images, GIF animations, and videos can also be added as watermarks to realize the picture-in-picture effect.

4. You can use the “Trim” function to select certain video clips to convert. And you can also take advantage of the “Crop” function to remove black edges or change the screen size.